Polyester filter - Внос износ

The Miha-Vac MDS Q3 industrial mobile dust collection system is designed for filtering dust particles by gravity separation in a cyclone separator and subsequent filtration by a fine polyester filter. This process allows the separation of 99.9% of the suction dust in the separator and filtration from 1 to 5 microns, class F8M8. The system consists of a centrifugal fan with a remote motor 2.2 KW, speed 2890 rpm. This and the design of the impeller give a flow rate of 1500 cubic meters per hour and a static pressure of 1900 Pa. The suction of the dust particles is carried out through a pipeline with a diameter Ф 100 mm. Entering the cyclone separator, particles up to 10 microns are separated in a container with a volume of 40 liters. The remaining fine powder below 10 microns is collected by a cartridge polyester filter, collecting it in a container with a volume of 15 liters. The frame is made of tubular profile 40x40x2 and 60x30x2, equipped with four locking, wear-resistant wheels.

Powerful and reliable industrial dust collector Miha Vac Qf It is used in various sectors of industry and household, where the requirements for cleanliness are at a maximum level. Allows integration into processes in which solid or powder particles are present. Through the primary separation of an integrated cyclone separator, it promotes the efficient precipitation of coarse particles up to 10 microns. Subsequent filtration through a basic polyester filter with a high purification class M8 / F8-EU8 effectively captures particles up to 1 µm. The industrial vacuum cleaner is equipped with H14 HEPA filter and the last degree of purification is 99.995%, particles up to 0.1 µm. In order to reduce the cost of consumables, the machine is equipped with easy, manual, pulse tapping of the main filter, which effectively extends its operation. The sucked material is collected in a metal waste container with a capacity of 40 liters, without the need for additional garbage bags.

System Properties: Filtration of particles by gravity separation with a cyclone separator and their collection in a hopper. Subsequent filtration of the exhaust air by a fine polyester filter. This process allows the separation of 99% of the sucked dust and filtration from 1 to 5 microns. The system is designed to:Cleaning of industrial and residential buildings. Cleaning fireplaces and stoves. Aspiration from carpentry machines. Suction of chips and metal dust from metalworking machines. Transport, dust collection and collection of dry mixes and materials. Consists of:Turbine with external engine – 1.5 kW; 2830 rpm Single-phase or three-phase; Flow rate – 2000 cubic meters per hour; Pressure 1900 Pa. Main suction cyclone separator + 40 liter hopper with airtight lid to collect larger particles over 5 microns. Filter station also equipped with cyclone separator + 40 liter hopper with airtight lid for finer dust up to 1 micron.Filter element with a fine degree of purification – 99%.